Installation guide

- 13 -
RX Sensitivity:
802.11b:
-
97 dBm @ 1 Mbps, -94 dBm @ 2 Mbps, -92 dBm @ 5.5 Mbps, -
90 dBm
@ 11 Mbps
802.11g:
-
93 dBm @ 6 Mbps, -91 dBm @ 9 Mbps, -90 dBm @ 12 Mbps, -
88 dBm @
18 Mbps,
-84 dBm @ 24 Mbps, -80 dBm @ 36 Mbps, -
76 dBm @ 48 Mbps,
-
74 dBm @ 54 Mbps
802.11a:
-
90 dBm @ 6 Mbps, -89 dBm @ 9 Mbps, -89 dBm @ 12 Mbps, -
85 dBm @
18 Mbps,
-83 dBm @ 24 Mbps, -79 dBm @ 36 Mbps, -
75 dBm @ 48 Mbps,
-
74 dBm @ 54 Mbps
Protocol Support
General Protocols: Proxy ARP, DNS, HTTP, HTTPS, IP, ICMP, SNTP,
TCP, U
DP, RADIUS, SNMP, PPPoE, DHCP
Interface
Default Antennas*:
2 dual-band omni-directional antennas, 2 dBi,
RP-SMA (male)
*Only available with the AWK
-3121 and AWK-3121-SSC models.
Connector for External Antennas:
AWK
-3121 and AWK-3121-SSC: RP-SMA (female)
AWK
-3121-M12: QMA (female)
RJ45 Ports: 1, 10/100BaseT(X) auto negotiation speed, F/H duplex
mode, and auto MDI/MDI
-X connection (AWK-3121 only)
Fiber Ports:
1, 100BaseFX port (SC connector, AWK-3121 only)
M12 Ports: 1, 10/100BaseT(X) auto negotiation speed, F/H duplex
mode, and auto MDI/MDI
-X connection (AWK-3121-M12 only)
Console Port:
RS-232 (RJ45-type)
LED Indicators: PWR1, PWR2, PoE*, FAULT, STATE, signal strength,
CLIENT MODE, BRIDGE MODE, WLAN, 10/100 (TP port), 100M (fiber
port), LAN (M12 port)
*PoE is only available for the AWK
-3121 and AWK-3121-M12
Alarm Contact:
1 relay output with current carrying capacity of 1 A @ 24
VDC
Digital Inputs:
2 electrically isolated inputs
• +13 to +30 V for state “1”
• +3 to
-30 V for state “0”
• Max. inpu
t current: 8 mA
Physical Characteristics
Housing:
Metal, providing IP30 protection
Weight:
850 g
Dimensions:
53.6 x 135 x 105 mm (2.11 x 5.31 x 4.13 in)
Installation:
DIN-Rail mounting, wall mounting (with optional kit)
Environmental Limits
Operating Temperature:
Standard Models:
-25 to 60°C (-13 to 140°F)
Wide Temp. Models:
-40 to 75°C (-40 to 167°F)