User Manual

- 16 -
Point-to-Multipoint Scenario (Client Mode)
Configuring the AWK as a Client
• Step 1: Set the operation mode of the AWK to Client mode.
Go to Wireless LAN Setup  Operation Mode, select Client and
click Submit to apply the change.
NOTE
The default operation mode for the AWK is Client.
• Step 2: Link to an existing SSID.
Go to Wireless LAN Setup  WLAN  Basic WLAN Setup and
click Site Survey to select an existing SSID, or directly enter an
existing SSID in the text field.
The default SSID is MOXA.
• Step 3: Set the RF type and Channel settings for the AWK.
On the Wireless LAN Setup  WLAN  Basic WLAN Setup
page, edit the RF type and Channel settings.
Click Submit to apply the changes, and restart the AWK in client
mode to complete the configuration process.