User Manual

- 11 -
LED Indicators
The front panel of the Moxa AWK-1131A contains several LED indicators.
The function of each LED is described in the table below.
LED
Color
State
Description
Front Panel LED Indicators (System)
PWR Green
On
Power is on.
Off
Power is not being supplied.
FAULT Red
Blinking
(fast at
0.5-
second
intervals)
Cannot get an IP address from the
DHCP server.
Blinking
(slow at
1-second
intervals)
IP address conflict.
Off
Error condition does not exist.
STATE
Green/
Red
Green
System startup is complete and the
system is in operation
Green
Blink
ing at
1-second
intervals
The AWK has been located by the
Wireless Search Utility.
Red
Booting error condition
SIGNAL
(5 LEDs)
Green
On
Signal level(for Client mode only)
Off
WLAN
Green
On
WLAN function is in client mode and
AWK has established a link with an AP.
Blinking
WLAN data communication is running
in client mode
Off
WLAN is not in client mode or AWK has
not established a link with an AP.
Amber
On
WLAN function is in AP mode.
Blinking
WLAN’s data communication is
running in AP mode
Off
WLAN is not in use or not working
properly
TP Port (RJ45) LED Indicators (Port Interface)
1000M Green
On
TP port’s 1000 Mbps link is active.
Blinking
Data is being transmitted at 1000
Mbps
Off
TP port’s 1000 Mbps link is inactive.
10/100M Amber
On
TP port’s 10/100 Mbps link is active.
Blinking
Data is being transmitted at 10/100
Mbps
Off
TP port’s 10/100 Mbps link is
inactive.