User Manual

- 10 -
1000BaseT Ethernet Port Connection
1000BaseT data is transmitted on differential TRD+/- signal pairs over
copper wires.
MDI/MDI-X Port Pinouts
Pin
Signal
1
TRD(0)+
2
TRD(0)-
3
TRD(1)+
4
TRD(2)+
5
TRD(2)-
6
TRD(1)-
7
TRD(3)+
8
TRD(3)-
RS-232 Connection
The AWK-1131A has one RS-232 (8-pin RJ45) console port located on the
top panel. Use either an RJ45-to-DB9 or RJ45-to-DB25 cable to connect
the Moxa AWK-1131A’s console port to your PC’s COM port. You may then
use a console terminal program to access the AWK-1131A for console
configuration.
Console Pinouts for 10-pin or 8-pin RJ45
10-Pin
Description
8-Pin
1
–
2
DSR
1
3
–
2
4
GND
3
5
TxD
4
6
RxD
5
7
–
6
8
–
7
9
DTR
8
10
–
NOTE
The pin numbers for both 8-pin and 10-pin RJ45 connectors (and
ports) are typically not labeled on the connector (or port). Refer
to the pinout diagram above for details.