User`s manual

AWK-1121/1127 Other Console Considerations
5-3
4. The Console login screen will appear. Log into the RS-232 console with the login name (default: admin)
and password (default: root, if no new password is set).
5. The AWK-1121/1127’s device information and Main Menu will be displayed. Please follow the description on
screen and select the administration option you wish to perform.
NOTE
To modify the appearance of the
PComm Terminal Emulator window, select Edit

Font
and then choose the
desired formatting options.
ATTENTION
If you unplug the RS
-232 cable or trigger DTR, a disconnection event will be evoked to enforce logout for
network security.
You will need to log in again to resume operation.
Configuration by Telnet and SSH Consoles
You may use Telnet or SSH client to access the AWK-1121/1127 and manage the console over a network. To
access the AWK-1121/1127’s functions over the network from a PC host that is connected to the same LAN as
the AWK-1121/1127, you need to make sure that the PC host and the AWK-1121/1127 are on the same logical
subnet. To do this, check your PC host’s IP address and subnet mask.
NOTE
The
AWK-1121/1127’s default IP address is 192.168.127.253 and the default subnet mask is
255.255.255.0 (for a Class C network). If you do not set these values properly, please check the network
settin
gs of your PC host and then change the IP address to 192.168.127.xxx and subnet mask to
255.255.255.0.
Follow the steps below to access the console utility via Telnet or SSH client.