User`s manual

AWK-1121/1127 Software Installation and Configuration
4-14
11. To save the configuration to a text file, select Export from the COM Mapping menu. You will then be able
to import this configuration file to another host and use the same COM Mapping settings in the other host.
Moxa OnCell Linux Real TTY Driver
The AWK-1127 uses the same Real TTY serial driver as Moxa’s OnCell cellular gateways. The below section
describes how to use the OnCell Linux Real TTY Driver to map a virtual tty port for the AWK-1127.
Basic Procedure
To map an AWK-1127 serial port to a Linux host’s tty port, follow these instructions:
1. Set up the AWK-1127. After verifying that the IP configuration works and you can access the AWK-1127 (by
using ping, telnet, etc.), configure the desired serial port on the AWK-1127 to RealCOM mode.
2. Install the Linux Real TTY driver files on the host.
3. Map the AWK-1127 serial port to the host’s tty port.