User`s manual

AWK-1121/1127 Software Installation and Configuration
4-11
5. When using Windows XP, a message is displayed during the activation of each port, indicating that the
software has not passed Windows Logo certification. Click Continue Anyway to proceed.
6. Ports that have been activated will appear in black.
7. Click on the created COM port to select it. Then right click to select Basic Setting tab. On the Basic Setting
tab, use the COM Number drop-down list to select a COM number to be assigned to the AWK-1127’s serial
port that is being configured. Note that ports that are “in use” will be labeled accordingly.