User`s manual

AWK-1121/1127 Software Installation and Configuration
4-10
Alternatively, for RealCOM mode, you can select Input Manually and then manually enter the
AWK-1127 ’s IP Type. To do this, select LAN type, followed by 1st Data Port, and 1st Command Port for
the COM ports that will be mapped to. Click OK to proceed to the next step. Note that the Add OnCell page
supports FQDN (Fully Qualified Domain Name), in which case the IP address will be filled in automatically.
4. COM ports and their mappings will appear in blue until they are activated. Activating the COM ports saves
the information in the host system registry and makes the COM port available for use. The host computer
will not have the ability to use the COM port until the COM ports are activated. Click Yes to activate the COM
ports at this time, or click Cancel to activate the COM ports later.