User`s manual

AWK-1121/1127 Software Installation and Configuration
4-9
Click Continue Anyway to finish the installation.
6. Click Finish to complete the installation of the OnCell Windows Driver Manager.
Using OnCell Windows Driver Manager
After you install OnCell Windows Driver Manager, you can set up the AWK-1127 ’s serial ports as remote COM
ports for your PC host. Make sure that the serial port(s) on your AWK-1127 are set to RealCOM mode when
mapping COM ports with OnCell Windows Driver Manager.
1. Go to Start
OnCell Windows Driver Manager OnCell Windows Driver Manager to start the COM
mapping utility.
2. Click the Add icon.
3. Click Rescan to search for the AWK-1127. From the list that is generated, select the server that you will
map COM ports to, and then click OK.