User`s manual

AWK-1121/1127 Software Installation and Configuration
4-7
Connection
• Connection timeout (secs): Use this option to set the waiting time for the Default Login, Locate,
Assign IP, Upload Firmware, and Unlock to complete.
• Upgrade timeout (secs): Use this option to set the waiting time for the connection to disconnect while
the firmware is upgrading. Use this option to set the waiting time for the Firmware to write to flash.
Misc.
Search on start: Checkmark this box if you would like the search function to start searching for devices after
you log in to the AWK search Utility.
OnCell Windows Driver Manager
The AWK-1127 uses the same RealCom serial driver as Moxa’s OnCell cellular gateways. The below section
describes how to use the OnCell Windows Driver Manager to create a virtual COM port for the AWK-1127 in
RealCom mode.
Installing OnCell Windows Driver Manager
OnCell Windows Driver Manager is intended for use with AWK-1127 serial ports that are set to RealCOM mode.
The software manages the installation of drivers that allow you to map unused COM ports on your PC to serial
ports on the AWK-1127. These drivers are designed for use with Windows
98/ME/NT/2000/XP/2003/Vista/2008. When the drivers are installed and configured, devices that are attached
to serial ports on the AWK-1127 will be treated as if they were attached to your PC’s own COM ports.
1. Click the INSTALL COM Driver button in the OnCell Installation CD auto-run window to install the OnCell
Windows Driver. Once the installation program starts running, click Yes to proceed.
2. Click Next when the Welcome screen opens, to proceed with the installation.