User`s manual

AWK-1121/1127 Software Installation and Configuration
4-4
Configuring the AWK Search Utility
The Broadcast Search function is used to locate all AWK-1121/1127 APs that are connected to the same LAN as
your computer. After locating an AWK-1121/1127, you will be able to change its IP address. Since the
Broadcast Search function searches by TCP packet and not IP address, it doesn’t matter if the AWK-1121/1127
is configured as an AP or Client. In either case, APs and Clients connected to the LAN will be located, regardless
of whether or not they are part of the same subnet as the host.
1. Start the AWK Search Utility program. When the Login page appears, select the “Search AWK only”
option to search for AWKs and to view each AWK’s configuration. Select the “AWK management” option to
assign IPs, upgrade firmware, and locate devices.
2. Open the AWK Search Utility and then click the Search icon.