User`s manual
AWK-1121/1127 Web Console Configuration
3-47
Loading Factory Defaults
Use this function to reset the AWK-1121/1127 and roll all settings back to the factory default values. You can
also reset the hardware by pressing the reset button on the rear panel of the AWK-1121/1127.
Password
You can change the administration password for each of the AWK-1121/1127’s console managers by using the
Password function. Before you set up a new password, you must input the current password and reenter the
new password for confirmation. For your security, do not use the default password root, and remember to
change the administration password regularly.
Misc. Settings
Additional settings to help you manage your AWK-1121/1127, are available on this page.
Reset button
Setting Description Factory Default
Always enabled The AWK-1121/1127’s Reset button works normally. Always enabled
Disabled 60 sec after
boot-up
The AWK-1121/1127’s “reset to defaults” function will go
inactive 60 seconds after the AWK-1121/1127
finishes booting
up.