User`s manual

AWK-1121/1127 Web Console Configuration
3-46
ATTENTION
Please make sure the power source is
stable when you upgrade your
firmware. An unexpected power breakup
may damage your
AWK-1121/1127.
Config Import/Export
You can back up or restore the AWK-1121/1127’s configuration with Config Import/Export.
In the Config Import section, click Browse to specify the configuration file and click Config Import button
to begin importing the configuration.
In the Config Export section, click the Config Export button and save the configuration file onto your local
storage media. The configuration file is a text file and you can view and edit it with a general text-editing tool.
You can also do automated device back ups or setup restoration using Moxa’s dedicated configuration
import-export accessory, the ABC-01 (HW Rev. 1.1 support only).
To download the configuration to the AWK device:
1. Turn off the AWK device.
2. Plug in the ABC-01 to the AWK’s console, via the RS-232 port.
3. Turn on the AWK device.
4. The AWK device will automatically detect the ABC-01 during the boot process, and will automatically
download the configuration file from the ABC-01 to the AWK. Once the configuration downloads, then-if the
configuration format is correct-the AWK will emit three short beeps and continue the boot process.
5. Once the AWK has booted up successfully, it will emit the normal two beeps and the “Ready” LED will turn
to solid green.