User`s manual

AWK-1121/1127 Web Console Configuration
3-11
WPA type
Setting Description Factory Default
Personal Provides Pre-Shared Key-enabled WPA and WPA2 Personal
Enterprise Provides enterprise-level security for WPA and WPA2
Encryption method
Setting Description Factory Default
TKIP
Temporal Key Integrity Protocol is enabled
TKIP
AES Advance Encryption System is enabled
EAPOL Version
Setting Description Factory Default
1 EAPOL version 1 was standardized in the 2001 version of
802.1X, which is much more commonly implemented.
1
2 EAPOL version 2 was specified in 802.1X-2004.
Passphrase
Setting Description Factory Default
8 to 63 characters Master key to generate keys for encryption and decryption None
WPA/WPA2-Enterprise
When used as a client, the AWK-1121/1127 can support three EAP methods (or EAP protocols): EAP-TLS,
EAP-TTLS, and EAP-PEAP, corresponding to WPA/WPA2-Enterprise settings on the AP side.
EAP Protocol
Setting
Description
Factory Default
TLS Specifies Transport Layer Security protocol TLS
TTLS Specifies Tunneled Transport Layer Security
PEAP Specifies Protected Extensible Authentication Protocol, or
Protected EAP
Before choosing the EAP protocol for your WPA/WPA2-Enterpise settings on the client end, please contact the
network administrator to make sure the system supports the protocol on the AP end. Detailed information on
these three popular EAP protocols is presented in the following sections.