User`s manual

WE-2100T Series User’s Manual Web Console: System Management
9-15
System Management> Maintenance> Change Password
The Change Password page is located under Maintenance in the System Management folder.
To change the password, first enter the old password in the Old password field. Leave this blank
if the module is not currently password-protected. Enter the new password twice, once in the New
password field and once in the Confirm password field. Leave these fields blank to remove
password protection.
ATTENTION
If you forget the password, the ONLY way to configure the module is by loading the factory
defaults with the reset button on the evaluation board. All settings will be lost.
Before setting the password, you may want to first export the configuration to a file. Your
configuration can then be easily imported back into the module if necessary.