User`s manual

WE-2100T Series User’s Manual Web Console: System Management
9-4
System Management> Misc. Network Settings> SNMP
Agent Settings
The SNMP Agent page is located under Misc. Network Settings in the System Management
folder. This page is used to configure the SNMP Agent on the WE-2100T.
SNMP
Default
Enable
Options
Enable, Disable
Description
This field enables or disables the SNMP Agent. If enabled, you will need to
configure other SNMP Agent settings. You will need to enter a community
name under Community string.
Community String
Default
public
Options
free text (e.g., “public community”)
Description
This field specifies the community string used for the SNMP Agent. This is a
text password mechanism that is used to weakly authenticate queries to agents
of managed network devices.
Contact Name
Default
Options
free text (e.g., “J Smith”)
Description
This is an optional free text field that can be used to specify the SNMP
emergency contact name, telephone, or pager number.
Location
Default
Options
free text (e.g., “Building XYZ”)
Description
This is an optional free text field that can be used to specify the location for
SNMP agents such as the module.