User`s manual

WE-2100T Series User’s Manual Web Console: Serial Port Settings
8-2
Overview
This chapter explains how to configure all settings located under the Serial Port Settings folder in
the web console.
Serial Port Settings> Port 1> Operation Modes
The Operation Modes page is where you configure the serial port’s operation mode and related
settings. For an introduction to the different operation modes, please refer to Chapter 4.
Application
Default
Socket
Options
Socket, Device Control
Description
This field specifies what kind application you will be using for this serial port.
Depending on the application, different operation modes and related settings
will be displayed. For an introduction to the different operation modes, please
refer to Chapter 4.
Device Control: The serial port will be used to control a device using legacy
software installed on a Windows, Linux, or UNIX system. Drivers will need to
be installed that will allow your software to communicate with the device as if it
were physically attached to a local COM or TTY port. You may select between
RealCOM and RFC2217 operation modes.
Socket: This serial port will be used for a TCP or UDP socket-based application.
You may select between TCP Client, TCP Server, and UDP operation modes.