User`s manual

WE-2100T Series User’s Manual Web Console: Network Settings
7-21
Network Settings> Advanced Settings
On the Advanced Settings page in the Network Settings folder, you can modify Gratuitous ARP,
Auto report to, Auto report period, and Active interface.
Gratuitous ARP
Default
Disabled
Options
Disabled, Enabled, 10 to 1000 sec
Description
This field specifies how often the WE-2100T sends broadcast packets to update
the ARP table. This may be required for certain applications.
Disabled: The WE-2100T will not send broadcast packets to update the ARP
table.
Enabled: The WE-2100T will send periodically send broadcast packets at the
time interval as specified in Send period.
Auto Report To
Default
Options
IP address and port (e.g., “192.168.64.64” and “4002”)
Description
This optional field specifies the destination IP address for the module’s IP
address report. Regular IP address reports are sent to the specified IP address
and port when the module’s IP address is configured by DHCP or BOOTP.
These IP address reports are used to notify a network host of the module’s
current IP address.
The destination for the IP address report should be one of the following :
y a network host running the IP Address Report function in Network Enabler
Administrator
y a network host running a user-developed application that uses the IP report
protocol
Please refer to Chapter 12 for details on receiving IP address reports in Network
Enabler Administrator. Please refer to Appendix E for details on the IP report
protocol.