User`s manual

WE-2100T Series User’s Manual Web Console: Network Settings
7-5
Network Settings> WLAN Settings> WLAN
The WLAN page is located under WLAN Settings in the Network Settings folder. You can
modify IP configuration, IP address, Netmask, and Gateway for your WLAN.
The WE-2100T supports IEEE 802.11a/b/g wireless network interfaces. The supported IP
configurations are static and dynamic (BOOTP , DHCP, or BOOTP+DHCP ). Users can set up the
IP configuration with the serial console, or the Web/Telnet consoles through the WE-2100T’s
Ethernet interface.
IP Configuration
Default
Static
Options
Static, DHCP, DHCP/BOOTP, BOOTP
Description
This field determines how the WE-2100T’s IP address will be assigned.
Static: IP address, netmask, and gateway are user-defined.
DHCP: IP address, netmask, gateway, DNS, and time server are assigned by
DHCP server.
DHCP/BOOTP: IP address, netmask, gateway, DNS, and time server are
assigned by DHCP server. IP address is assigned by BOOTP server if DHCP
server does not respond.
BOOTP: IP address is assigned by BOOTP server.
IP Address
Default
192.168.127.254
Options
IP address (e.g., “192.168.1.1”)
Description
This field is for the IP address that will be assigned to your WE-2100T module.
An IP address is a number assigned to a network device (such as a computer) as
a permanent address on the network. Computers use the IP address to identify
and talk to each other over the network. Choose a proper IP address that is
unique and valid in your WLAN environment. If your module will be assigned a
dynamic IP address, set the “IP configuration” parameter appropriately.