User`s manual

WE-2100T Series User’s Manual Web Console: Network Settings
7-3
Network Settings> Ethernet Settings
On the Ethernet Settings page in the Network Settings folder, you can modify IP configuration,
IP address, Netmask, Gateway, and Speed.
You must assign a valid IP address to the WE-2100T before it will work in your network
environment. Your network system administrator should provide you with an IP address and
related settings for your network. The IP address must be unique within the network; otherwise the
WE-2100T will not have a valid connection to the network. First-time users should refer to
Chapter 5 for more information.
IP Configuration
Default
Static
Options
Static, DHCP, DHCP/BOOTP, BOOTP
Description
This field determines how the WE-2100T’s IP address will be assigned.
Static: IP address, netmask, and gateway are user-defined.
DHCP: IP address, netmask, gateway, DNS, and time server are assigned by
DHCP server.
DHCP/BOOTP: IP address, netmask, gateway, DNS, and time server are
assigned by DHCP server. IP address is assigned by BOOTP server if DHCP
server does not respond.
BOOTP: IP address is assigned by BOOTP server.
IP Address
Default
192.168.126.254
Options
IP address (e.g., “192.168.1.1”)
Description
This field is for the IP address that will be assigned to your WE-2100T module.
An IP address is a number assigned to a network device (such as a computer) as
a permanent address on the network. Computers use the IP address to identify
and talk to each other over the network. Choose a proper IP address that is
unique and valid in your network environment. If your module will be assigned
a dynamic IP address, set the “IP configuration” parameter appropriately.