User`s manual

WE-2100T Series User’s Manual Web Console: Basic Settings
6-5
Local Time
Default
Options
Date (yy:mm:dd), Time (hh:mm:ss)
Description
The module has a built-in real-time clock that allows you to add time
information to functions such as the automatic warning e-mail or SNMP trap.
This field shows the current time according to the module’s built-in real-time
clock. This is not a live field, so you will need to refresh the browser to get an
updated reading.
Click Modify to adjust the real-time clock. Make sure that you first select the
correct time zone. The real-time clock will be updated immediately, with no
need to restart the module.
ATTENTION
When modifying the local time, select the time zone first. The time display will be updated to
reflect the specified time zone.
ATTENTION
There is a risk of explosion if the real-time clock battery is replaced incorrectly!
The real time clock is powered by a lithium battery. We strongly recommend that you obtain
assistance from a MOXA support engineer before replacing the battery. Please contact the MOXA
RMA service team if you need to change the battery.
Time Server
Default
Options
IP address or domain name (e.g., “192.168.1.1” or “time.nist.gov”)
Description
This optional field specifies your time server’s IP address or domain name, if a
time server is used in your network. The module supports SNTP (RFC-1769)
for automatic time calibration. The module will request time information from
the specified time server every 10 minutes.