User`s manual

WE-2100T Series User’s Manual Serial Command Mode
13-12
Using Web Console
Please refer to Chapter 6 for information on opening the web console. The Serial Command
Mode page is located under System Settings in the System Management folder.
Modify the settings as needed, and then click Submit. Remember that you will need to save the
configuration and restart the module for any changes to effect.
Using Serial Console
To access the serial console, connect the module’s serial console port (P1) to your PC’s serial port,
and then use a terminal emulator program to enter the serial console. Please refer to the Serial
Console section in Chapter 5 for details on how to open the serial console. Once the serial console
is open, it functions exactly the same as if connecting by Telnet console.