User`s manual

WE-2100T Series User’s Manual Serial Command Mode
13-5
OP Code Parameter Comments
Am
xxx.xxx.xxx.xxx
(e.g., 255.255.255.0)
accessible IP netmask 13
An
xxx.xxx.xxx.xxx
(e.g., 255.255.255.0)
accessible IP netmask 14
Ao
xxx.xxx.xxx.xxx
(e.g., 255.255.255.0)
accessible IP netmask 15
Ap
xxx.xxx.xxx.xxx
(e.g., 255.255.255.0)
accessible IP netmask 16
Operation Mode Commands
OP Code Parameter Comments
OM
0: Real COM
1: TCP server
2: TCP client
3: UDP mode
operation mode
TCP Server Mode Commands
OP Code Parameter Comments
TM 1 – 4 max. number of connections
TL 0 – 65535 local TCP port
TT 0
–
99 (minutes) TCP alive check time
TI 0 – 65535 (ms) inactivity time
TX
0: no delimiter
1: enable 1-character delimiter
2: enable 2 character delimiter
number of characters to use as delimiter
TY
ASCII character in hex code
(i.e., “A1” for character 0xA1)
character to use for delimiter 1
TZ
ASCII character in hex code
(i.e., “A1” for character 0xA1)
character to use for delimiter 2
TF 0 – 65535 (ms) force transmit time
Real COM Mode Commands
OP Code Parameter Comments
RM 1 – 4 max. number of connections
RT 0 – 99 (minutes) TCP alive check time
RX
0: no delimiter
1: enable 1-character delimiter
2: enable 2 character delimiter
number of characters to use as delimiter
RY
ASCII character in hex code
(i.e., “A1” for character 0xA1)
character to use for delimiter 1
RZ
ASCII character in hex code
(i.e., “A1” for character 0xA1)
character to use for delimiter 2
RF 0 – 65535 (ms) force transmit time