User`s manual

WE-2100T Series User’s Manual Using Network Enabler Administrator
12-17
Advanced Settings
In the Advanced Settings tab, you may configure how serial data is transmitted from the PC to the
WE-2100T.
Tx Mode
Hi-Performance is the default for Tx mode. After the driver sends data to the
module, the driver immediately issues a “Tx Empty” response to the program.
Under Classical mode, the driver will not send the “Tx Empty” response until after
confirmation is received from the module. This causes lower throughput. Classical
mode is recommended if you want to ensure that all data is sent out before further
processing.
FIFO
When “FIFO” is disabled, the selected serial port will send one byte each time the
Tx FIFO becomes empty, and an Rx interrupt will be generated for each incoming
byte. This will cause a faster response time but lower throughput.
Serial Parameters
In the Serial Parameters tab, the COM port’s serial communication parameters are defined.