User`s manual

WE-2100T Series User’s Manual Using Network Enabler Administrator
12-14
COM Mapping
The COM Mapping function is used to configure the Real COM drivers, which are automatically
installed with Network Enabler Administrator. The Real COM drivers map COM ports over the
network to serial ports on WE-2100T modules. This allows a local application to use COM5, for
example, to communicate with a device attached to the module.
The Real COM drivers operate transparently and rely on Network Enabler Administrator only for
initial configuration or adjustment. The COM Mapping context menu is shown below:
ATTENTION
The WE-2100T’s serial port must be operating in Real COM mode in order to be used for COM
mapping.