User`s manual

WE-2100T Series User’s Manual Using Network Enabler Administrator
12-9
Upgrade Firmware
Description
This allows you to upload new firmware to the target module. You will be
prompted to indicate where the firmware file is located. Firmware updates can
be downloaded from
www.moxa.com.
It will take a few moments for the module’s firmware to be updated. Do not
disconnect the network, the module, or your PC at any time during the update.
ATTENTION
You can update the firmware of multiple units simultaneously if the units are all the same model.
Simply hold down the CTRL or SHIFT key when selecting the target modules.
Import and Export Configuration
Description
These commands are used to save or restore the target module’s configuration.
All configuration settings can be stored on a file to be restored later, from
anywhere on the network. Follow the onscreen instructions to save or restore
the target unit’s configuration.
ATTENTION
You can import the configuration of multiple units simultaneously if the units are all the same
model. Simply hold down the CTRL or SHIFT key when selecting the target modules.