User`s manual

WE-2100T Series User’s Manual Using Network Enabler Administrator
12-8
Assign IP Address
Description
This allows you to set the target module’s IP address quickly, instead of digging
through pages of configuration parameters.
Configure
Description
This opens the target module’s configuration window. In the configuration
window, tabs are used to navigate between the different settings. Please refer to
Chapters 6 through 10 for a description of the various settings on the
WE-2100T. Click a Modify checkbox to enable changes to the associated
parameter. Click OK to implement changes.
ATTENTION
You can configure multiple units simultaneously if the units are all the same model. Simply hold
down the CTRL or SHIFT key when selecting the target modules.