User`s manual

WE-2100T Series User’s Manual Introduction
1-2
Overview
The WE-2100T is a very compact module that installs in a serial device to connect it to a wireless
LAN. With such a small size, around half the size of a credit card., it can be installed into almost
any kind of serial device. The WE-2100T also comes with a built-in TCP/IP stack for fast
integration with your serial devices. This means that your engineers can spend less time with the
TCP/IP and wireless details, and more time on developing major features, shortening your
product’s time to market. The reliable TCP/IP communication firmware can be configured easily
using a Windows utility, a web browser, serial console, or Telnet console. In addition, a
Windows-based NECI (Network Enabler Configuration Interface) library is available to help you
develop your own Windows utilities.
An integration kit and a complete development kit are both available for evaluation and
development use. The development kit contains a development board, documents, sample code,
cables, and accessories.
Package Checklist
z 1 WE-2100T Series module (depending on which model you order)
z 1 WE-2100T-ST (the evaluation board )
z WE-2100T Series Documentation & Software CD
z 1 power adaptor
z 1 power cords
z 1 null modem cable
z 1 cross-over Ethernet cable
z Product Warranty Booklet
z Quick Installation Guide
NOTE: Notify your sales representative if any of the above items is missing or damaged.
Product Features
The WE-2100T has the following features:
z 802.11 a/b/g compliance
z Auto-sensing TTL to 10/100 Mbps Ethernet interface
z Compact size and ready-to-go design
z Ready-to-use TCP/IP firmware for fast integration
z TCP Server, TCP Client, UDP, Real COM, RFC2217 operation modes
z Serial Command Mode for configuration through the data port
z Easy configuration by web console, serial console, Windows utility, or Telnet console
z 9 GPIOs for user-developed applications
z Software reset function