Installation guide

8-42
www.moxa.com
[e-mail]
8
Serial Device Servers >
WE-2100T Series
Serial-to-Ethernet Solutions
Specifi cations
Form Factor
Type: Small metal housing that encloses advanced ARM-based 32-bit
processor; supports both wireless and Ethernet connections
Dimensions: 54 x 40 x 13.3 mm (2.13 x 1.57 x 0.52 in)
Automatic Network Selection
Wireless or Ethernet: The WE-2100T will activate the Ethernet
connection if detected at boot-up. If an Ethernet connection is not
detected, the WE-2100T will choose wireless as the communication
interface. Which interface to use can also be confi gured with the
WE-2100T’s confi guration utilities.
Ethernet Interface
Number of Ports: 1
Speed: 10/100 Mbps, Auto MDI/MDIX
Connector: 44-pin dual-in-line
Magnetic Isolation Protection: 1.5 KV built-in
WLAN Interface
Standard Compliance: IEEE 802.11a/b/g
Network Mode: Infrastructure mode (a/b/g), Ad-Hoc mode (b/g)
Spread Spectrum Technology: DSSS, CCK, OFDM
5.15 to 5.25 GHz: 15 dBm @ 6 Mbps; 12 dBm @ 54 Mbps 5.725 to
5.825 GHz: 15 dBm @ 6 Mbps; 12 dBm @ 54 Mbps
2.412 to 2.483 GHz: 17 dBm @ 6 Mbps; 15 dBm @ 54 Mbps
2.412 to 2.472 GHz: 18 dBm @ 1 to 11 Mbps
5.15 to 5.25 GHz: 6 Mbps @ -90 dBm; 54 Mbps @ -72 dBm
5.725 to 5.825 GHz: 6 Mbps @ -89 dBm; 54 Mbps @ -72 dBm
2.412 to 2.483 GHz: 6 Mbps @ -90 dBm; 54 Mbps @ -73 dBm
2.412 to 2.472 GHz: 11 Mbps @ -87 dBm; 1 Mbps @ -94 dBm
Transmission Rate:
802.11a: 54 Mbps
802.11b: 11 Mbps
802.11g: 54 Mbps
Transmission Distance: Up to 100 meters (in open areas)
Wireless Security: AES, WEP 64/128-bit, WPA, WPA2, 802.11i
802.11i Authentication: TLS, PEAP/GTC, PEAP/MD5, PEAP/
MSCHAPv2, TTLS/PAP, TTLS/CHAP, TTLS/MSCHAP, TTLS/
MSCHAPv2, TTLS/EAP-MSCHAPv2, TTLS/EAP-GTC, TTLS/EAP-MD5,
LEAP
Channels:
North America: CH1 to CH11, 5150-5825 MHz
Europe: CH1 to CH13, 5150-5875 MHz
Japan: CH1 to CH14, 5150-5350 MHz
Antenna Connector: Reverse SMA
Antenna Gain: 2 DBi
The WE-2100T supports Real COM, TCP Server, TCP Client, UDP,
and RFC 2217 operation modes, which are designed to fulfill the
Easy on-site confi guration of network settings•
Simple command frame format•
Comprehensive command set for serial and network confi guration•
The WE-2100T supports Real COM, TCP Server, TCP Client, UDP,
Operation Modes for Embedded Applications
On-site Confi guration with Serial Command Mode
The WE-2100T is a secure and compact embedded wireless module
for connecting serial devices to access points in infrastructure mode,
or to other WE-2100T’s in ad-hoc mode. When using the WE-2100T,
The WE-2100T is a secure and compact embedded wireless module
Overview
complex RF know-how is not needed to connect serial devices to
a wireless Ethernet network. Encryption for secure data transfer is
supported, along with the 802.11a/b/g radio specifications.
requirements of embedded module applications. Complete driver
support for Real COM mode is included and easy to install.
Easily switch between software and hardware triggers•
Software reset•
WE-2100T Series
Wireless LAN embedded serial device servers
Connects serial devices to IEEE 802.11a/b/g networks ›
Choice of operation modes: Real COM, TCP Server, TCP Client, ›
UDP, and RFC2217
Windows (including Vista!) real COM and Linux fi xed TTY ›
drivers provided
Wireless security with WEP, WPA, and WPA2 ›
Select Any Baudrate between 50 bps and 921.6 Kbps ›
9 programmable digital I/O channels ›
SSL/SSH encryption for confi guration ›
Compact size and easily mounted housing ›
The certifi cation logos shown here apply to some or all of the
products in this section. Please see the Specifi cations section
or Moxa’s website for details.