User`s manual

W406 Hardware User’s Manual Introduction
Product Hardware Specifications
Computer
CPU: Cirrus Logic EP9302 ARM9 32-bit RISC CPU, 200 MHz
OS (pre-installed): WinCE 6.0/Embedded Linux with MMU support
DRAM:32 MB (max. 64 MB)
Flash: 16 MB (max. 32 MB)
USB: USB 2.0 compliant hosts x 1, type A connector
Storage
Storage Expansion: SD slot
Ethernet Interface
LAN: 1 auto-sensing 10/100 Mbps port (RJ45)
Magnetic Isolation Protection: 1.5 KV built-in
Cellular Interface
Cellular Modes: GSM, GPRS, EDGE
Radio Frequency Bands: 850/900/1800/1900 MHz
GPRS Class: 12
EDGE Class: 12
Coding Schemes: CS1 to CS4
Serial Interface
Serial Standards: 2 RS-232/422/485 ports, software-selectable (DB9 male)
ESD Protection: 15 KV ESD protection for all signals
Console Port: RS-232 interface (TxD, RxD, GND), with 4-pin pin header output
Serial Communication Parameters
Data Bits: 5, 6, 7, 8
Stop Bits: 1, 1.5, 2
Parity: None, Even, Odd, Space, Mark
Flow Control: RTS/CTS, XON/XOFF, ADDC™ (automatic data direction control) for RS-485
Baudrate: 50 bps to 921.6 Kbps (non-standard baudrates supported; see user's manual for details)
Serial Signals
RS-232: TxD, RxD, DTR, DSR, RTS, CTS, DCD, GND
RS-422: TxD+, TxD-, RxD+, RxD-, GND
RS-485-4w: TxD+, TxD-, RxD+, RxD-, GND
RS-485-2w: Data+, Data-, GND
Digital Input
Input Channels: 4, source type
Input Voltage: 0 to 30 VDC at 5 KHz
1-4