User`s manual

2
2
Chapter 2 Getting Started
In this chapter, we explain how to connect the W406-LX, how to turn on the power, how to get
started programming, and how to use the W406-LX’s other functions.
The following topics are covered in this chapter:
 Powering on the W406-LX
 Connecting the W406-LX to a PC
¾ Serial Console Port
¾ Acquiring the IP Address of the W406-LX
¾ Telnet Console
¾ SSH Console
 Configuring the Ethernet Interface
¾ Modifying Network Settings with the Serial Console Port
¾ Modifying Network Settings by Command
 USB Port for Expansion
 SD Socket for Storage Expansion
 Setting Up the Wireless Module
 Configuring the SIM Card
 Entering the PIN Code
 Verifying the SIM Card Status
 Enabling or Disabling the PIN Code Authentication
 Unlocking the SIM Card
 Connecting to the Internet
 Reconnecting to the Internet
 Disconnecting from the Internet
 Detecting an Internet Connection Error
 Sending and Reading an SMS Message
 Test Program—Dev
elo
ping Hello.c
¾ Installing the Tool Chain (Linux)
¾ Checking the Flash Memory Space
¾ Compiling Hello.c
¾ Uploading and Running the “Hello” Program