User`s manual

VPort P06-1MP-M12 EN 50155 IP Camera Getting Started
2-3
c. Mounting with the fixed plate
If nuts, gaskets, and spring washers cannot be used
when mounting on the ceiling, use the VP
-FP1 fixed
plate. Drill the green dotted
-line holes and the 4
camera mounting screw holes in the sticker, and then
put the VP
-FP1 inside the hole. Use the 2 countersink
screws to mount the VP
-SP1. Finally, mount the VPort
P06
-1MP-M12 on the fixed plate with 4 indented
hexagon head tapping screws.
VP-FP1
NOTE
The screw hole for mounting the VP
-FP1 fixed plate is a countersink hole with 5 mm diameter, 90° to the
surface, with 2 x 2 mm chamfer. Be sure to take this into account when drilling these 2 screw holes.