User`s manual

VPort 36-1MP System Configuration
4-40
CGI Event
The VPort can accept 5 CGI commands, which are sent from external devices, such as ioLogik series Ethernet
I/O, to be the event alarms.
NOTE
The VPort only can accept the CGI commands that follow the VPort’s CGI commands format.
CGI Event Trigger Actions
Setting Description Default
Enable CGI Event alarm Enable or disable CGI Event alarm. Disable
Event Select the Event 1, 2, 3, 4, 5 Disable
Trigger Relay 1 alarm Once this VMD is triggered, the VPort will
trigger relay 1. Note
that relay behavior will follow the configuration in alarm basic
setting page.
Disabled
Send snapshot image
via E-mail
Once this VMD is triggered, the VPort will send the snapshot
images set in the Event Alarm/Basic page to the E-mail
addresses, which are set in the Network/ SMTP Server page.
Disabled
Send snapshot image
via FTP
Once this VMD is triggered, the VPort will send the snapshot
images set in the Event Alarm/Basic page to the FTP server,
which are set in the Network/ FTP Server page.
Disabled
Send message via HTTP
Event Servers
Once this VMD is triggered, the VPort
will send the message set
in HTTP Action Setting to the HTTP event servers, which are set
in the Network/ HTTP Event Server page.
Disabled
Record video on SD
card for Sec
Once this VMD is triggered, the VPort will record the video on
the SD card for a configured time period.
Disabled
HTTP Action Setting
Setting Description Default
Server 1, 2, 3, 4 Select the HTTP event server for sending the HTTP action Disable
Blank column Administrators can customize the message sent to the HTTP
event sever in this column
Blank