User`s manual

VPort 36-1MP System Configuration
4-28
Video Performance
The VPort 36-1MP can send a maximum of three simultaneously video streams: two H.264 and one MJEPG. In
fact, the VPort 36-1MP has two encoder engines. The first encoder engine can generate one H.264 video stream,
and this H.264 video stream is a completely independent video stream, which means its resolution, FPS and
video quality can be configured independently. The second encoder engine can generate one H.264 video
stream and one MJPEG video stream. Because both the H.264 and MJPEG video streams come from the same
encoder engine, their resolution must be the same, but the FPS and the Video Quality can be configured
separately. The administrator can set the Resolution, Max. Frame Rate and Video Quality on this web page.
Streams
Setting Description Default
Enable the video
streams
To enable the VPort to send this video streams or not. Enable stream 1:
H.264 and stream 2:
MJPEG
Codec Type
This codec type shows the codec of each video stream.
Resolution
The VPort 36-1MP supports 7 different resolutions: 1MP, HD, SVGA, Full D1, 4CIF, VGA, CIF
Setting Description Default
Select the image size 6
image resolutions (size) are provided. The administrator can
choose each option with NTSC or PAL modulation.
1280 x 720 for
stream1
720 x 480 for stream
2
Resolution NTSC PAL
1MP 1280 x 800 1280 x 800
HD 720P 1280 x 720 1280 x 720
SVGA 800 x 600 800x 600
Full D1 720 x 480 720 x 576
4CIF 704 x 480 704 x 576
VGA 640 x 480 640 x 480
CIF 352 x 240 352 x 288
NOTE
1280 x 800, 1280 x 720, and 800 x 600 are only available in stream 1, max resolution for stream 2 is full D1
resolution