User`s manual

VPort 36-1MP System Configuration
4-16
FTP Server Settings
FTP is the other method available for the VPort to send alarm messages and snapshots.
1st FTP Server
Setting Description Default
1st FTP server FTP server’s IP address or URL address. None
1st FTP server port FTP server’s authentication. None
1st FTP user name None
1st FTP remote folder FTP file storage folder on the remote FTP server. None
1st FTP passive mode Passive transfer solution for FTP transmission through a
firewall.
Disabled
NOTE
The
2nd FTP Server is a backup in case the 1st FTP Server fails to connect or has trouble sending files.
NOTE
Whenever the system reboots, a system log will be sent by email or FTP to show the login status of the VPort.
The system log will be sent to the Sender email address if the SMTP server settings are correct. To send the
system log via FTP, the SMTP server should be erased since the E
-
mail system is used by default to transmit the
system log.
NOTE
For either e
-mail or FTP, the information of the 1st server sho
uld be entered first. If the 1st server is not set,
the related FTP or email will be cancelled. Note that it may take time to connect to the 2nd server after the first
server fails, and this may affect some applications when adverse conditions occur too of
ten.