User`s manual

VPort 36-1MP System Configuration
4-10
Step 2:
Once VPort 36-1MP completes the IP settings, it will acquire the configuration file from the TFTP server, and
check if this configuration file is right or not.
NOTE
For the auto
-configuration function to work, the system should
1.
Have a DHCP Server that supports DHCP Opt 66/67 in the network switches and routers.
2.
Have a TFTP server that supports the TFTP protocol
General Settings
Setting Description Default
IP address Variable IP assigned automatically by the DHCP server, or fixed
IP assigned by the Administrator.
192.168.127.100
Subnet mask Variable subnet mask assigned automatically by the DHCP
server, or a fixed subnet mask assigned by the Administrator.
255.255.255.0
Gateway
Assigned automatically by the DHCP server, or assigned by the
Administrator.
Blank
Primary DNS
Enter the IP address of the DNS Server used by your network.
After entering the DNS Server’s IP address, you can input the
VPort’s url (e.g., www.VPort.company.com
) in your browser’s
address field, instead of entering the IP address.
Obtained
automatically from
the DHCP server, or
left blank in
non-DHCP
environments.
Secondary DNS Enter the IP address of the DNS Serve
r used by your network.
The VPort will try to locate the secondary DNS Server if the
primary DNS Server fails to connect.
Obtained
automatically from
the DHCP server, or
left blank in
non-DHCP
environments.