User`s manual

VPort 36-1MP System Configuration
4-4
Server Location
Setting Description Default
Max. 40 characters Edit the location of this camera server Blank
Date and Time
Setting Description Default
Keep current date and
time
Use the current date and time as the VPort’s time setting. Keep current date
and time
Sync with computer
time
Synchronize VPort’s data and time setting with the local
computer time.
Manual Manually change VPort’s date and time setting.
Automatic Use the NTP server for changing VPort’s date and time setting
in a given period.
NOTE
Select the
Automatic option to force the VPort to synchronize automatically with timeservers over the
Internet. However, synchroniz
ation may fail if the assigned NTP server cannot be reached, or the VPort is
connected to a local network. Leaving the
NTP server blank will force the VPort to connect to default
timeservers. Enter either the Domain name or IP address format of the timeser
ver if the DNS server is
available.
There are 2 NTP servers can be setup as the backup, and the update interval can be configured from minimum
15 minute to one month.
Don’t forget to set the
Time zone for local settings. Refer to Appendix G for your region’s time zone.
Account Privileges
Different account privileges are available for different purposes.
Admin password
Setting Description Default
Admin Password (max.
14 characters)
The administrator can type the new password in this box. Default admin
password is “admin”
Confirm Password
(max. 14 characters)
If a new password is typed in the Admin Password
box, you
will need to retype the password in the Confirm Password
box before updating the new password.