User`s manual

VPort 36-1MP Introduction
1-6
Back Panel View
1. 5 pin terminal block for DI and relay connection
2. 2 pin terminal block for RS-485 pin connection
3. RJ45 port for PoE/non-PoE connection
4. Groud screw for connection grounding wire
5. 3 pin terminal block for power input
6. LED indicator to show network and system status. Green when normal.
7. LED indicator to show power status. Green when normal.
NOTE
The
VPort 36-1MP can be powered by 12 VDC / 24 VDC / 24 VAC input or Power over Ethernet (PoE, 802.3af
).
You can connect both power inputs to create
redundant power input.