Installation guide

- 5 -
Bottom View
NOTE
You will find
the mounting bracket fastened at
the bottom of the
camera. Y
ou can
remove and reposition the bracket to the top of
the camera to meet your deployment requirements..
• Auto Iris Socket: Plug auto-iris cable from camera lens to this socket
for auto-iris function
• Lens Holder: Lens holder is designed for CS mount lenses, C/CS
adapter is required if you want to use C mount lenses. Find more
details in the HW installation section of this manual.
• SD Card Slot: Remove the SD card slot cover and insert an SD card
for disconnection/event local storage
• Mounting Bracket Screw Hole: Screw holes for fastening mounting
brackets.
• Reset Button: Use a pointed object to push down the reset button to
reboot. Push and hold the button until system reboot to restore
factory defaults.