Installation guide

- 13 -
SNMPv1/v2c/v3, DDNS, Modbus/TCP, 802.1X,
SSH/SSL
Ethernet
1 10/100BaseT(X) Ethernet port, RJ45 connector
Standard
OnVIF
Local Storage
SD socket
Standard SD socket (SDHC)
GPIO
Digital input
1, max. 8mA
High: +13V to +30V
Low: -30 to +3V
Relay output
1, max. 24VDC @ 1A
Serial Interface
RS-485
1 full-duplex RS-485
LED Indicator
STAT
Indicates if the system booted properly or not
Network
10Mbps or 100Mbps
Power
Power on/off
Power
Input 12VDC/24VDC/24VAC
or Power over Ethernet (PoE,
802.3af)
Physical Characters
Housing
Metal housing, IP30 rated
Dimensions
78 x 65 x 150 mm
Installation Wall mounting, ceiling mounting, pole mounting,
corner mounting
(Optional external housing and mounting accessory
maybe required)
Security
Password
User level password protection
Filtering
By IP address
Authentication
802.1X
Encryption
SSL/SSH
Alarm
Intelligent video
Camera tamper / virtual fence / object counting /
alert zone / missing object / Loitering object
(IVA functions are optional except for camera
tamper)
Video Motion
Detection
3 independently configurable motion area
Scheduling
Daily repeat timing schedule
Imaging
JPEG snapshots for pre/trigger/post alarm images
Email/FTP
messaging
Automatic transfer of stored images via email or
FTP as event-triggered actions
Custom Alarms HTTP event servers and CGI events for setting
customized alarm actions
Pre-alarm Buffer
24 MB video buffer for JPEG snapshot images
Environmental Limits
Operating
Temperature
-40 to 75°C (-40 to 167°F ) for T model
0 to 60°C (32 to 140°F ) for non-T model
Storage
Temperature
-40 to 85°C (-40 to 185°F)
Ambient Relative
Humidity
5 to 95% (non-condensing)
Regulatory Approvals