Installation guide

— 8 —
Step 9: Accessing VPort’s System Configuration
Click on System Configuration to access the overview of the system
configuration to change the configuration. Model Name, Server Name, IP
Address, MAC Address, Firmware Version, and LED Status appear in the
green bar near the top of the page. Use this information to check the system
information and installation.
For details of each configuration, check the User’s Manual on the software CD.
NOTE
After accessing the VPort 351’s web-based manager,
administrators should access System Configuration Æ System Æ
Account to set up the administrator’s password and enable the
authentication function. The administrator account name is admin.
An authentication window will pop up requesting the account name
and password each time the VPort 351 is accessed.