Installation guide

— 6 —
2. When the search has finished, the Model Name, IP address, MAC address,
Serial (i.e., serial number), and HTTP Port of the VPort will be listed in
the VPort Utility window.
NOTE
Serial refers to the production serial number of this VPort, and the
HTTP Port number is the http port used by this VPort.
3. Double click on the selected VPort, or use the IE web browser to access
the VPort’s web-based manager (web server).
Network Environment without DHCP Server
If your VPort 351 is connected to a network that does not have a DHCP server,
then you will need to configure the IP address manually. The default IP address
of the VPort 351 is 192.168.127.100 and the default subnet mask is
255.255.255.0. Note that you may need to change your computer’s IP address
and subnet mask so that the computer is on the same subnet as the VPort.
To change the IP address of VPort manually, access the VPort’s web server,
and then navigate to the System Configuration Æ Network Æ General page
to configure the IP address and other network settings. Checkmark Use fixed
IP address to ensure that the IP address you assign is not deleted each time the
VPort is restarted.
Step 6: Logging in to the VPort 351 web-based manager
Type the IP address in the web browser’s address input box and then press
enter.
Step 7: Installing the ActiveX Control Plug-in
A security warning message will appear the first time you access the VPort’s
web-based manager. The message is related to installing the VPort AcitveX
Control component to your PC or notebook. Click on Yes to install this plug-in
to enable the IE web browser for viewing video images.