Installation guide

2
y TCP, UDP, and HTTP network transmission modes
y Allows simultaneous access of up to 10 clients
y Set video quality to CBR (constant bit rate) or VBR (variable bit rate)
y Full D1, 4CIF, VGA, QVGA, and CIF video resolution supported
y Timestamp and text overlay supported
y RS-232/RS-422/RS-485 COM port for controlling PTZ (PAN/TILT/ZOOM)
motorized camera
y UPnP and IP filtering supported
Industrial Rugged Design
y Two 12/24 VDC and 24 VAC redundant power inputs with LED indicators
y -40 to 75°C operating temperature for critical industrial environments (“-T”
models)
y 35 mm DIN-rail mounting or panel mounting installation (with optional
accessories)
y IP30 protection
y Class 1, Div.2 hazardous certification for critical environments (pending)
Intelligent Alarm Trigger
y Built-in Video Motion Detection (VMD)
y Equipped with 2 DIs and 2 relays (DO) for external sensors and alarms
y Recorded video provided for pre/post alarm
y Snapshot images provided for pre, trigger, and post alarm
y Sequential snapshot images supported
y Messages with snapshot images can be sent via FTP or Email
y Configure alarm activation schedule
Video Management and Control
y MOXA SoftDVR™ Lite IP Surveillance Software for viewing and
recording bundled free
y Free MOXA IVN SDK supported with flexible interface and sample codes
for customized applications or system integration
NOTE
MJPEG, PPPoE, DDNS, QoS, and SNMP will be supported
starting with the release of V2.0 firmware. Please check MOXA’s
website for updates about new firmware releases.
NOTE
A version of SoftDVR Lite that supports the VPort 351 will be
released on MOXA’s website soon. Please check MOXA’s website
for updates about new firmware releases.
NOTE
If you are interested in the MOXA IVN SDK, please go to
MOXA’s website to download the software, or contact a MOXA
sales representative for more information.