Installation guide

— 17 —
Serial Port
PTZ port 1 RS-232 or RS-422/485 Terminal Block
connector; Max. speed of 115.2 Kbps
Console port 1 RS-232 RJ45 port
GPIO
Digital Inputs 2, max. 8 mA
“High”: +13V to +30V
“Low”: -30V to +3V
Relay Outputs 2 (max. 24 VDC @ 1A)
LED Indicators
STAT Indicates if the system booted properly
PWR1 Power 1
PWR2 Power 2
FAULT Can be configured to correspond to system alarm,
power failure, video loss, or disconnected
network
VIDEO Video input signal active
AUDIO TEST Audio input signal in test mode
PTZ PTZ control signal active
Power
Inputs Two 12/ 24 VDC or 24 VAC for redundancy
Consumption Near 8W
Mechanical
Casing IP30 protection, metal case
Dimensions (W x D x H) 52.98 x 135 x 105 mm (2.09 x 5.31 x 4.13 in)
Weight 960 g
Installation DIN-Rail or wall mounting
Environmental
Operating Temperature 0 to 60°C (32 to 140°F)
-40 to 75°C (-40 to 167°F) for -T models
Storage Temperature -40 to 85°C (-40 to 185°F)
Ambient Relative
Humidity
5 to 95% (non-condensing)
Regulatory Approvals
Safety UL 508 (Pending)
Hazardous Location UL/cUL Class I, Division 2, Groups A, B, C and
D (Pending), ATEX Class I, Zone 2, EEx nC IIC
(Pending)
EMI FCC Part 15, CISPR (EN55022) class A
EMS EN61000-4-2 (ESD), Level 2
EN61000-4-3 (RS), Level 3
EN61000-4-4 (EFT), Level 3
EN61000-4-5 (Surge), Level 3
EN61000-4-6 (CS), Level 3
EN61000-4-8
EN61000-4-11
EN61000-4-12
Shock IEC60068-2-27
Freefall IEC60068-2-32
Vibration IEC60068-2-6