Installation guide

NOTE
For Windows XP SP2 or above, the ActiveX Control component
may be automatically blocked for security reasons. In this case, the
warning message may not appear. Unblock the ActiveX control
function or disable the security configuration to allow installation
of the VPort ActiveX Control component.
Step 8: Continue to the VPort’s web-based manager
After installing the ActiveX Control component, the VPort’s web-based
manager will appear. Check the following items to verify that the system was
installed properly:
y Video images
y Audio (make sure your PC’s or notebook’s sound is turned on)
y Video information
Step 9: Access the VPort’s system configuration
In the VPort's web-based manager, the model name, server Name, IP address,
MAC address, firmware version, and LED status will be displayed at the top
of the page. Use this information to verify system information and installation.
Click System Configuration to see an overview of the system configuration.
- 8 -