Installation guide

- 3 -
y
1 auto-sensing 10/100BaseT(X) Ethernet port
y RS-232/RS-422/RS-485 COM port for controlling PTZ (pan/tilt/zoom)
motorized cameras
y "Transparent PTZ Control" function to control remote PTZ cameras with
legacy PTZ control panel or keyboard
y Built-in web server and RS-232 console for remote and local access &
configuration
y TCP, UDP, and HTTP network transmission modes
y Simultaneous access for up to 10 clients
y Set video quality to CBR (constant bit rate) or VBR (variable bit rate)
y Timestamp and text overlay
y DDNS (Dynamic DNS), UPnP and IP filtering supported
Intelligent Alarm Trigger
y Built-in video motion detection (VMD)
y 1 digital input channel and 1 relay (digital) output channel for external
sensor and alarm
y Alarm-triggered snapshots with pre-alarm and post-alarm snapshots
y Sequential snapshot images
y Messages with snapshot images sent by FTP or email
y HTTP action settings for customized alarm messages sent by HTTP event
server
y Configurable schedule for alarm activation
Convenient Hardware Installation
y Compact form factor for installation at almost any location
y Panel mounting and DIN-rail mounting (with DK-35A accessory)
y Loop-through power output with identical range as power input, for
powering analog cameras
Video Management and Control
y Moxa SoftDVR™ Lite IP surveillance software included for viewing and
recording
y Free VPort SDK PLUS available, with flexible interface and sample codes
for customized applications
NOTE
If you are interested in the VPort SDK PLUS, please visit
moxa.com to download the software, or contact a Moxa sales
representative for more information.