User`s manual

Moxa VPort 26A-1MP System Configuration
4-33
Audio
Audio Source
The VPort supports real-time and synchronous video/audio transmission. The default audio input is line-in. If a
microphone is being used, your administrator will need to enable the microphone.
PTZ
For its HD 720P (1280x720) image resolution, VPort 26A-1MP is able to provide crystal clear video image, and
viewers are allowed to see finest detail even after image zoomed. Therefore, VPort 26A-1MP comes with digital
PTZ function that enables users to zoom in camera image to observe the detail.
Digital PTZ
Before use digital PTZ, you need to enable digital PTZ function in VPort 26A-1MP setting page as shown below.
First check enable, then choose the PTZ function you are like to operate. Note that digital zoom and digital
pan/tilt functions could be enabled separately.
Press save when you done digital PTZ settings. Once Digital PTZ function is enabled, you can then go to IP
camera home page and click on Show PTZ Control Panel to perform digital PTZ functions.
Below is the PTZ control panel you will see when you click “Show PTZ Control Panel” in IP camera home page.
You can press “+” button in the bottom right of the page to perform digital zoom function. After digital zoom,
you can then navigate the camera image by press direction button in the wheel.