User`s manual

Moxa VPort 26A-1MP System Configuration
4-31
Resolution Type
For meeting different CCTV resolution requirement, there are NTSC or PAL mode can be selected.
NOTE
Due to there is only one video source, diff
erent resolution will have different viewing angle.
Streams
Setting Description Default
Enable the video
streams
To enable the VPort to send this video streams or not. Enable stream 1:
H.264 and stream 2:
MJPEG
Codec Type
This codec type shows the codec of each video stream.
Resolution
The VPort 26A-1MP supports 5 different resolutions: WXGA, HD, SVGA, Full D1, 4CIF, VGA, CIF, and QCIF.
Setting Description Default
Select the image size 8
image resolutions (size) are provided. The administrator can
choose each option with NTSC or PAL modulation.
1280x720
Resolution NTSC PAL
WXGA 1280x800 1280x800
HD 1280x720 1280x720
SVGA 800 x 600 800x 600
Full D1 720 x 480 720 x 576
4CIF 704 x 480 704 x 576
VGA 640 x 480 640 x 480
CIF 352 x 240 352 x 288
QCIF 176 x 112 176 x 144
Max. FPS (Frame per second)
Setting Description Default
Maximum frame rate The maximum frame rate is different to accommodate different
modulations of video input. Administrators can also set up the
maximum frame rate to optimize bandwidth use.
NTSC: 1, 3, 5, 10, 15, 20, 25, 30
PAL: 1, 3, 5, 8, 12,16, 20, 25
30 for NTSC, 25 for
PAL
NOTE
Frame rate (frames per second) is determined by the resolution, image data size (bit rate), and transmission
traffic status. The Administrator and users can check the frame rate status in the
FPS Status
on the VPort’s
web homepage.