User`s manual

Moxa VPort 26A-1MP System Configuration
4-5
Admin password
Setting Description Default
Admin Password (8 to
15 characters)
The administrator can type the new password in this box. Default admin
password is “admin”
Confirm Password (8 to
15 characters)
If a new password is typed in the Admin Password box, you
will need to retype the password in the Confirm Password
box before updating the new password.
NOTE
The default account name for administrator is
admin; the administrator account name cannot be
changed.
User’s Privileges
VPort products provide 10 user accounts for accessing the VPort.
Setting Description Default
User Name Type a specific user name for user authentication. None
Password Type a specific password for user authentication.
Privilege Check the function boxes to assign privileges for users in
Control Relay1
NOTE
The FPS of the video stream will be reduced as more and more users access the same VPort. Currently, the
VPort 26A
-1MP is only allowed to send 5 unicast video streams. Therefore, limit the number of users
simultaneously accessing a VPort 26A
-1MP to prevent performance problems.
Local Storage
The VPort 26A-1MP supports an SD card slot (SDHC interface) for recording video when preconfigured events
(alarms) occur. Administrators can download these recorded videos via FTP, or remove the SD card and directly
copy the files via a card reader.
Local Video Recording Setting
Setting Description Default
Enable video recording
once there is an
event/alarm
Enable the video recording action once there is an event/alarm Enable