User`s manual

Moxa VPort 26A-1MP System Configuration
4-4
Server Contact
Setting Description Default
Max. 40 characters Edit the responsible operator for this camera server Blank
Server Location
Setting Description Default
Max. 40 characters Edit the location of this camera server Blank
Date and Time
Setting Description Default
Keep current date and
time
Use the current date and time as the VPort’s time setting. Keep current date
and time
Sync with computer
UTC time
Synchronize VPort’s data and time setting with the local
computer time.
Manual Manually change VPort’s date and time setting.
Automatic
Use the NTP server for changing VPort’s date and time setting
in a given period.
NOTE
Select the
Automatic option to force the VPort to synchronize automatically with timeservers over the
Internet. However, synchronization may fail if the assigned
NTP server cannot be reached, or the VPort is
connected to a local network. Leaving the
NTP server blank will force the VPort to connect to default
timeservers. Enter either the Domain name or IP address format of the timeserver if the DNS server is
available.
2 NTP servers may be set as backups, and update intervals can be configured from a minimum of 15 minutes
to a
maximum of one month.
Don’t forget to set the
time zone in local settings. Refer to Appendix G for your region’s time zone.
Account Privileges
Different account privileges are available for different purposes.